Double-sided linkage lugs and reversing shafts with robust bearings. Clearly arranged, grouped hoses with a hose bracket. Folding parking leg. Angled reversing shaft for maximum clearance when manoeuvering.
Innovative construction for ideal pull line
Minimum side pull and maximum directional stability because headstock turnover shaft is close to the tractor. Ideal pull line.
Strong reversing mechanism
The turnover shafts are fi tted with large taper roller bearings. Smooth, reliable reversing via two large telescopic cylinders. Excellent stability on all terrain.
Intelligent frame construction
Tractive force is transferred directly to the plough beam via the main plough frame bearing right at the front – good tractive force, similar to mounted ploughs. Plough beam: 7 in x 7 in / 180 x 180 mm, beam thickness: 0.4 in / 10 mm.
Resilient body mounting
The leg mounting brackets on both sides are designed to take high loads. On both standard ploughs and plus ploughs, a breakaway bolt protects the bodies from overloading.
1. Optimum pull line Ideal pull line through the rear axle because the headstock turnover shaft is close to the tractor. The result is minimal side pull and maximum directional stability for the tractor.
2. Standard hose arrangement All the hydraulic hoses leading to the tractor are clearly grouped in a hose bracket. Coloured markings make connection easier.
3. Strong reversing mechanism Smooth, reliable reversing via two telescopic cylinders. The turnover shafts are fi tted with large taper roller bearings. Separate, accurate camber adjustment via two adjusting screws. Easy connection and disconnection with the folding parking leg.
4. Front furrow width In the standard plough the front furrow width is adjusted by means of a turnbuckle in the main frame (hydraulic cylinder optional). In plus ploughs hydraulic adjustment is standard. Quick and easy to set the front furrow width required. Maximum adjustment range for front furrow width – ideal on slopes and in diffi cult soil conditions.
5. Furrow width adjustment On standard ploughs furrow width is adjustable in fi ve stages via a hole matrix on the frame and a turnbuckle on the control rod. On SERVO 6.50 Plus ploughs furrow width is adjusted hydraulically via the control rod.
6. Optimum landside pressure The large wheel absorbs lateral pressure for low-drag, low-wear ploughing. Landside heels on the last furrow are standard.
Contact;
* Grassland: Manfred Dipolt
Phone +43 (0)7248 600 2253
* Tillage: Franz Kühberger
Phone +43 (0)7248 600 2249
